|Welcome to Cobalt Universe. We hope you enjoy your visit.|
You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.
Join our community!
If you're already a member please log in to your account to access all of our features:
|How to Adjust the Headlights on a Chevy Cobalt|
|Tweet Topic Started: Jan 9 2011, 11:47 AM (4,263 Views)|
|LsLowBalt||Jan 9 2011, 11:47 AM Post #1|
Here we go STEELERS
How to Adjust the Headlights on a Chevy Cobalt
Things You'll Need:
• Tape measure
• Writing utensil
• 6 mm socket wrench
1. Step 1
Prepare your Chevy Cobalt to adjust your headlights. Park the car on a level surface 15 to 25 feet away from a wall or garage door. For optimal results, check that the air pressure in the tires matches the level at which you typically drive.
2. Step 2
Open the hood and locate the headlight adjustment screws. Chevy places these near the headlamp assemblies. The adjustment control on the low beam lights also adjusts your high beam lights. If this doesn't correct your problem, you may need to remove the headlight and shim it to adjust the trajectory path.
3. Step 3
Measure from the low beam aim dot to the floor and mark this measurement on the wall. You may want to draw a line on the wall equal to the width of the Chevy Cobalt to indicate the proper adjustment.
4. Step 4
Make sure the headlights are on and use a 6mm socket wrench to adjust the screws. You adjust each headlight individually. Watch the trajectory path on the wall and turn the screws the proper direction to move the path until it matches your line on the wall.
My Cardomian |
My Show off thread
|2 users reading this topic (2 Guests and 0 Anonymous)|
|« Previous Topic · How To: Vehicle Maintenance · Next Topic »|